Advantages of aluminium alloy quick-fit ducting in terms of energy saving and consumption reduction

The main component of carbon steel pipe is iron, easy to chemical reaction with water and oxygen in the air to produce iron oxide (i.e. rust), the material with the compressed air transfer to the air compressor and production equipment, which causes wear and tear of the air compressor and the production equipment damage to the use of the unit to increase the additional loss, even if the installation of gas triplex and other filtration facilities, rust is easy to corrode the filter material, resulting in the short service life of the filter material. Aluminium alloy piping does not react with water and oxygen in the air and does not produce rust and other impurities.

Aluminium alloy pipe is extruded, with consistently high quality and smooth inner wall surface, the inner wall roughness is only 0.02~0.04mm, while ordinary carbon steel pipe internal roughness is about 0.19mm, even stainless steel pipe roughness is also in 0.1mm or so. Aluminium alloy roughness is only one-tenth of the carbon steel pipe, and roughness due to corrosion and increase year by year, which leads directly to a reduction in the flow and pressure drop through the generation of carbon steel pipe 3a pressure drop rose 0.1MPa, electricity costs an average of 1.0 CNY/ (kW-h) as an example, 3a after 1 set of 75kW compressor 1a increase in energy consumption (pressure rises 0.1MPa, compressor energy consumption increased by 7%) as follows:. ) is as follows:.

75kWx7%x1.0 CNY / (kW-h)=5.25d (1h increase in energy consumption)

5.25x261dx24h = 32886 CNY (1a increase in energy consumption, according to 1a261d, 1d24h calculation)

The result is obvious, the use of aluminium alloy quick-fit piping, 1a1 air compressor system can save nearly 30,000 CNY of cost expenditure。

Also, there is no leakage problem of aluminium alloy pipeline, aluminium alloy pipeline is connected with 0-type rubber coupled with fast assembling joints, sealing will not be reduced over time. Carbon steel pipeline, whether it is installed with a wire or welded installation, in the threaded joints and weld parts always start to corrode first, long-term corrosion through the pipe wall resulting in leakage, and increase the energy consumption of the system, increase operating costs.